Skip to content

Built around the air path

Air Intake Hoses

More than just a length of hose. Every bend, branch and connection has a job to do, which is why the right shape and fit matter when it comes time to replace one.

250+

Live part numbers

98%+

Of the range in stock

Same-day

Dispatch before cut-off

OE-matched

Fit, form & function

How it works

What air intake hoses do — and when they need replacing

An air intake hose carries filtered air from the air box to the throttle body or turbo. It might look like a simple rubber hose, but the shape matters — the bends, diameters and connection points are made for a particular vehicle and have to fit properly around everything else under the bonnet.

Over time, engine heat, vibration and oil vapour take their toll. The rubber can harden, crack or split, allowing unmetered air into the engine. Sometimes the damage is obvious. Other times it's a small crack hidden in one of the folds that only opens up when the engine moves.

A failing intake hose can cause a rough or hunting idle, loss of power, an engine light or an air leak that's difficult to pin down. Once the problem is found, replacing it is usually straightforward — provided you've got the right hose. That's where having the range on the shelf matters.

Trade tip: match the hose, not just the diameter

Air intake hoses are application-specific. Check the part number and connection points as well as the diameter — especially any breather or sensor connections. And check the clamps while you're there; there's little point fitting a new hose and leaving an old clamp that won't seal properly.

Signs of a failing intake hose

  • Rough or hunting idle
  • Check-engine light or air-flow fault
  • Whistle or hiss from the engine bay
  • Visible cracks, splits or perished rubber

Any of these can point to an intake leak — check the hose closely, especially around the folds and connection points.

Moulded, not just cut.

The detail

Moulded, not just cut.

Formed to match the original — with the right bends, diameters and connection points for a clean fit and proper seal.

Air Intake Hoses

About our air intake hoses

With over 250 air intake hoses in the range, Boonma covers many of the common replacement applications across Australian roads. From straightforward air-cleaner hoses to more complex moulded designs with multiple connection points, each is matched to the vehicle for the right shape, diameter and fit.

The result is a hose that fits where it should, connects properly and seals properly — without having to make it work.

Built to match the original

There's more to an intake hose than its two end diameters. The length, bends, internal diameter and every breather, sensor or vacuum connection need to be in the right place. Get one of those wrong and the hose either won't fit properly or won't seal as it should.

That's why we match each hose to its application and check the shape, dimensions and connection points against the original before it joins the range. The rubber also has to cope with the heat, vibration, oil vapour and constant movement of the engine bay — while staying flexible enough to do its job.

Air Intake Hoses build detail

Our range

Inside the air intake hose range

Our air intake hose range covers around 28% of the cars on Australian roads, measured from AutoInfo. That's more than 1,400 vehicle applications, with particular strength across the Japanese and Australian makes that have traditionally made up a big part of the local car park. And with 98%+ of the range in stock, what you find in the catalogue is usually on the shelf and ready to go.

28%

Of the AU fleet · AutoInfo

1,400+

Vehicle applications

Japanese & Australian

Strongest coverage

Coverage and counts measured from AutoInfo, June 2026 — and growing every month.

Toyota, Nissan, Mazda, Mitsubishi and Holden are particular strengths, reflecting the vehicles that have long made up a big part of the Australian car park. And as new demand develops, we're continuing to add to the range.

Quality & warranty

Sourced, checked, and backed.

Boonma parts come from quality-certified suppliers and are checked against catalogue and OE fitment data before we stock them — so the part that leaves your counter is one you can stand behind.

Supplier certifications

ISO 9001

12 months / 20,000 km warranty

whichever comes first.

See how we manage quality

A closer look

A sample of our range

Here are just a few of the air intake hoses in our range. Select any part to see it up close and check which vehicles it fits.

Ready to order?

Already a Boonma reseller? Log in to search by vehicle or rego, confirm fitment, check stock and pricing, and place your order.

Not a Boonma reseller yet?

If you run an automotive parts business and would like access to the Boonma range, we'd be happy to hear from you.

Become a Reseller